Showing posts with label Loveland Woodturning. Show all posts
Showing posts with label Loveland Woodturning. Show all posts

Sunday, September 21, 2008

2008 Loveland Wood Turning Symposium

Sorry for the way overdue write up on this year's Loveland Woodturning symposium. It's amazing how time gets away from you.

This year's Symposium had a great lineup of Demonstrators. Some of the Demonstrators included Mike Mahoney, Stuart Batty, Clay Foster, Molly Winton, Pete Holtus, Lee Carter, Steve Gotchall and Phil Lackey. The Event lasted 2 days, September 13th and 14th with a Dinner/Banquet and Auction Saturday evening.

One of the great features of this years Symposium was the Hands on Room was not only open to everyone, but it had a project going on during each of the rotations. This allowed participants to try and usually complete a project during a rotation that they were able to leave with. Some of the projects were Turning Talc, making Spurtles and Spatulas, Globes for Christmas Ornaments, Tops, and a Slim line pen. I thought this was a great idea and really gave everyone who wanted the opportunity to try their hand at turning during this 2 day event.




For the First rotation I chose to watch Molly Winton's "JMaking and use of home-made brands and Commercial Pyrography Pens" I ended up with the best seat in the house as we needed a camera operator for the room. Molly gave a great demo on how she designs the various wood burning tips, uses them and make custom handles for them as well. She also discussed the commerical brand burners and hand pieces avaible for wood turning

Here Molly is starting off, showing the woodburner she uses for demo's as well as her kit for woodburning.

She also brought several of her outstanding pieces along to show as examples of the various styles and designs she uses on her turnings.


For the Next Rotation, I sat in on a local instructor's demo - Doug Schneiter. Doug does alot of hollw form's that have natural voids in them and walked through the steps of doing so for his rotation. Below is him roughing out the piece on a Jet mini.


A close up shot after he had formed and hollowed the piece, still on the lathe.

The third rotation I watched was by Phil Lackey on adding interest to a piece. He explained his influences of bird carving and decorating and that flow into his turnings. During the demo he laid out a spiral pattern on a hollow form and showed how he did the piercing design. He discussed how he tries to vary where and how he's piercing to ensure variety and why he settled on the style of carver he did. Below are some of the pieces he brought to show.

The final rotation of the day I got to sit in on a demo by Clay Foster. I've been in awe of Clay's design, flow and creativity in his woodturning so I was very excited at the opportunity to get to see his demonstration. For this demonstration he showed and explained how he uses egg shells, printers ink or mud and map gas for creating different sytles or patterns in his work.
Below Clay is holding one of his turnins that he covered with egg shells to give it what I'd call a ceramic look. Behind him is the map he used to point out Crum, Texas, where he's from.


Here he's showing how he lays out a pattern in mud, then uses the torch to burn in the design
and the mud protects and then falls off of the form.

Applying the mud
The end result.

Sunday Morning, Molly and Clay did a critique of many of the pieces in the instant gallery. Below they discuss the design and flow of a Bruce Perry turning.


And for the Last demo I managed to catch the rotation with Mike Mahoney showing the Mcnaughton coring techniques. He discussed the value of this system, especially for him as it enables him to get the most wood usage from a single, very expensive, piece of wood.

And for the Final Closing words, our organizers - Allen Jensen and Trent Bosch.






(Posted on 11/19)

Monday, April 7, 2008

Bruce Perry Inspired piece

From the March turning meeting I was very inspired by Bruce's demo on winged bowls. I really liked the flow and curve of the pieces he demo'd plus the look of the small vessel sitting on the piece. So I gave it a whirl. Below is a piece that I turned one evening in a couple of hours. It started off as an approx 3" thick 8" wide, and 13" long piece of aspen my dad found in some rough cut timber.

I mounted it off center on the lathe. I started by turning the bottom flow of the piece along with a tennon for me to mount this into a chuck. I was then able to reverse the piece and hold the tennon with my oneway chuck. I then progressed inwards from the outer wing working to form the piece's wave similar to what I had outlined on the bottom. I did this portion in steps to ensure that I didn't make any portion to weak to support the tension of the turning on the outer edges. As I got to the center, I started to outline the vessel and give it shape. The hardest part was defining the bottom of the vessel. Due to where the wings of the piece are and the angle to get the bottom, this posed some major problems I'm still working on. Bruce had used some custom tools he ground just for this purpose. Basically they were right angle bent tools for scraping and a pointed tool to get into the bottom corner. I then removed the tailstock and hollowed out the vessel. This proved to be the easiest of the project. I then did a LOT of sanding. Both with the lathe on, and with it off. The vessel was mainly done with the piece spinning, everything else very carefully with the lathe off. I then turned a jam chuck, re-mounted the vessel inside the jam chuck and cleaned up the bottom. It was then I realized that the shape of under the vessel should have been rounded not done like a normal bowl or vessel bottom. I hope you enjoy...

Thursday, April 3, 2008

Bruce Perry Demo - March 2008

Winged Bowls

Presented by: Bruce Perry

Reported by: John I. Giem

On March 6, 2008, Bruce Perry presented his method of turning a ‘winged bowl’ to the Loveland Woodturning club. He got started on doing this kind of turning after getting ‘bored’ from turning many bowls. He is trying to make a turning that resembles a teapot setting on a leaf of a flower.

Bruce Perry, winged bowl-2.jpg


Bruce Perry, winged bowl-2.jpg

One of Bruce’s winged bowls.

For the demo, Bruce used a piece of rectangular spalted birch about six inches by ten inches. He mounted off-center toward one corner between centers on the lathe. At the headstock, he used a disk covered with sandpaper mounted in a chuck. A live cup center without a center pin was used in the tailstock. He believes that a screw center has too high of a risk toward coming loose.

For safety reasons, the audience was split to two sides leaving a clearance in line with the piece being turned. During the demo, Bruce only wore safety goggles because his normal full face shield would interfere with our being able to hear him.

- The turning speed is critical. The faster it turns, the easier to cut and get a smooth finish. If it is turning at the resonance speed then the lathe will vibrate heavily and move all over the place. The turning speed MUST be either below or above the resonance.

- The initial cut was an arcing cut from inside to outside.

- He often uses a bandsaw to remove part of the waste after the initial shaping.

- The tailstock will eventually get in the way preventing the rubbing of the bevel on the gouge. At this point he switched to a bowl gouge with a straight across grind. This allows the continuation of bevel rubbing resulting in better control and smoother cuts.

- A tenon was turned on the bottom of the piece (that side toward the tailstock). He wants just enough to mount in the chuck be strong enough to hold but not so much that it interferes with the design.

- Uses a skew as a negative rake scraper to help smooth the surfaces.

- When he reverse mounted the piece using the tenon and chuck, he also used the tailstock to help stabilize the work.

- Keep the tool rest close to the work to give good support to the turning tools but yet far enough away so that the tool is supported on the shaft not its’ bevel.

- Cut from the outside toward the center leaving the thicker sections toward the center. If one were to cut from the center outward, then the thinner inner sections would work like a hinge allowing the outer rim to flex and vibrate.

- For better control, keep the tool rest parallel to the path of the cut.

- He turns the outer edge to about ¼ inch thick.

- When the cutting of the wing approaches the base of the pot or bowl, the clearances get tight and
there is the risk of catching the wing of the gouge and causing a ‘dig in’. To avoid this, he
switches to a spindle gouge and specially shaped scrapers.

- When possible, use heavier (thicker) tools to minimize unwanted vibrations.

- The scraper he uses to carve out the base near the bowl is a specially ground hooked negative rake scraper. Since this scraper gets relatively little usage, he ground it from an inexpensive carbon steel skew.

- He finds that the wings of the piece look better if they are just a little thicker at the outer end and a little thinner on the curve going back to the pot.

- He drilled a depth hole in the center of the pot (vessel) using a spindle gouge.

- Small hollowing tools with a negative rake were used to hollow the small vessel.

- He remounted the piece with the vessel mounted on a jam chuck. The chuck was custom turned to fit on the outside ‘downhill’ side of the bowl. There was a ¼” hole drilled through the chuck so that if the piece got stuck on the chuck, it could be removed using compressed air through the hole. The tailstock was used to hold the piece firmly on the jam chuck.

- The wings are sanded without the lathe rotating by using a two inch random orbit sander. The tool rest is removed while sanding to provide more room and access.

- He will use about three applications of sanding sealer before starting to sand.

- The sanding sealer will help stabilize the softer portions of the spalted birch. These softer sections are difficult to get smooth with the turning tools due to their softness. The sealer will improve their durability.

- Bruce took the piece home with him where he will finish the finial turning, sanding and finishing. He will bring it to the Symposium in September and enter it for auction to support the education grants.