Showing posts with label Wood Turning. Show all posts
Showing posts with label Wood Turning. Show all posts

Wednesday, December 3, 2008

A couple of the pieces I mentioned

Below is a couple of the pieces I've turned lately. I've been kinda shocked at how well they turned out. The first piece is a Lacewood piece that I turned and carved. For the first time putting a twist and tail on a turning I thought it turned out well. The piece is about 4 inches long and maybe an inch or two wide.

This is a side shot showing the shape and tail.


Another view showing a better angle of the tail

And then a Front view showing the hollowing and flow of it.


The second pieces is another of the Bruce Perry shapes I like to mess with. I'm doing an online Secret Santa exchange and turned the below piece for my recipient. Hope he enjoys it. This chunk of maple had some great curly grain to it and really turned out nice.

My wife pointed out that this one does look better standing on edge..
A side view for a better look at the vessel and wave profile.

Friday, April 25, 2008

Dale Nish woodturning class - Provo 2008

During the Rocky Mountain Woodturners 2007 Symposium in Loveland I had the opportunity to bid on an win a gift certificate for a basic wood turning class at Craft Supplies USA in Provo Utah. Scheduling worked out that I was able to take the Dale Nish class offered in April 2008. My Dad joined me for the trip over from Colorado and with the exception of a Windy trip through Wyoming, and a nice Spring Blizzard driving into Salt lake, the trip wasn't bad. The accommodation's at the Hampton Inn, while there, were very nice and the weather improved daily.


Class Started on Thursday morning. Showed up around 8:00 to a very nice setup. Each station had a full stash of tools, chucks, visor, and calipers.

There was a variety of Lathes to choose from, and I opted to use one I had not yet had a chance to turn on. A Oneway Lathe. They also had a couple of Vic-marks and a Powermatic.


Prior to the Class starting, we met Paul Chilton who was going to be the assistant to Dale during the course. He introduced us to his wife who was joining us in the class. Here, he's getting all the tools sharpened prior to the class beginning.


The first project in the class was to work on a Bead and cove stick. We turned an aspen spindle round, and worked on making even, repetitive beads along the length. Then, turning down every other bead, we worked a cove in between to end up with something like this:

It didn't turn out to bad, and gave Paul and Dale a measuring stick on our abilities on the lathe. I tried to make sure I pushed myself out of my comfort zone during the class since I had both instructors there to assist me when I had troubles. Most of the bead and cove stick above was done with a Skew. A tool I was previously hesitant (never) in using. :-D

Someone managed to get a shot of me turning... I guess I had to prove I was there somehow.
Obviously I wasn't the only person in the class. There was 7 others in the class. They ranged in location from Arkansas to Oregon and skill from a very experinced Pen maker to this being their first time touching a lathe. It was great fun and I met some great new friends.

Below Earl gets some advice from Dale Nish on working the Bead and Cove project.
Eric and Paul discussing the project as well.

Our next project was to turn a twig pot. Another project using aspen. This project was done by transferring some basic measurements given to us in an handout to establish the basic dimensions and shape of the pot. We established the Height, and major width points (Top, Bottom, neck, widest base point). Then using a drill bit in the tail stock we drilled a hole to allow for a test tube to be fitted into the pot. It was a very neat little project.

We broke for lunch after working on these for a bit and most of the class went to lunch together. It gave us time to meet and chat about turning, which was fun. After lunch Dale demo'd a project I had been intimidated by for a while. Turning a wooden egg. The reason I was intimidated was that someone had pointed out how difficult an egg or wooden fruit shape can be. Bowls, vases, etc come in all shapes and sizes. While Egg's do too, everyone pretty much has an idea of what an Apple, Pear or Egg shape should be. So it makes for increased awareness of the angles and shape of the form. Using another handout of base measurement points I was somewhat successful in this attempt. I made sure I tried a few more times, practice makes us better right?


Day two expanded more on our experience. Our Morning project was to turn a bowl shape and work on the hollowing of the interior. The kicker of this project was that after turning your bowl you took it to the bandsaw and cut it in half. The idea is, that this allows you to see and judge your work of hollowing out a consistent thickness through the bowl. This bowl ended up fairly even, but was a little thin at the very bottom. I likely would have made a very nice Funnel during sanding :-D

Friday afternoon we got to work on a bowl that we'd end up finishing. Paul spent some time with me working on the basic form and shapes on the outside of my bowls. As with the eggs I was having difficulty with a curve that looked like it flowed all the way through the bowl. This one actually ended up pretty flowing similar to if it was taken out of the portion of a larger sphere. I really liked this imagery to work on my shapes. Additionally, Dale and Paul explained that often times the tool marks on the outside of the bowl are made when your hand closest tot he bowl is guiding the tool rather than your back hand.. something I had not previously heard.
I thought this was a great shot of Dick turning and getting some great shavings coming out of the bowl.

Thursday night we had the amazingly fortunate opportunity to visit Dale's house for an open house and see his wood turning collection form around the world. This was a fantastic experience and I'll make another post with the tons of pictures I took.

Friday I realized that I had not caught a shot of Dale demoing during our class. So... below is him demoing the Sat morning project of a Platter. Another project i had not yet tried. During this project Paul worked with me again on the Ogee design on the side of the platter and how the inside curve and outside curve of the Ogee form should compliment each other.


Eric Turning on his platter,

Here is Dick working on the Bottom portion of the platter. Probably the most important part as when you run your hand from side to side the bottom is the part your hand feels the most deviation in if there is one.


Here Earl has his platter all turned and sanded and is working on applying a coat of Lacquer finish on it.

Here is a shot of Ron working on his platter. One of the two local students that were in our class.
Here is Virginia, Pauls wife, working on a small turned box. I got to see a couple stages of it and it was a very neat project I'm going to have to try at some point.

Here is Bill working on his platter. He had a great hat on during the class that I really liked. It simply said "RELAX"

And finally Steve, who drove all the way from Arkansas to take the course, working on his platter. By his head you can also see a collection of the turnings turned as demo's during various classes at Craft supplies.
This was a great class and I believe everyone had a blast learning from Dale and Paul. I highly recommend taking a class at Craft supplies if you get the opportunity.

Friday, December 14, 2007

So... why not some of my work


Let's start out with my Birthday cake from this year. It's almost as if Tammy knew exactly what I wanted.











Here's a few item's I've turned recently;


Last night I worked on an Ash bat for a friend of ours. She wanted to give it to her boyfriend for Christmas. It actually turned out pretty good and now Tammy wants on.
This is a Aspen vase I made to fit in a stand I had sitting around. It's not finished yet as I'm still trying to decide what kind of finish/finish work I want to do to it.
An Alder basket weave bowl I turned and burned. There's a basket weave patter on the top rim that was burned in.

A nice box elder bowl. Stands about 7" high and 10" across


One of my favorite pieces so far. A Cedar hollow form/vase that I turned, dremeled out the holes and burned with a butane torch

side view

This is one of my Elm vases I turned in the Trent class earlier this year. Finally got it dried and finished.
Some mini turnings I did. The walnut one (right) is about 2" high.

Another Mini. About 1" high, with a burned in pattern
This is from a piece of Old Pithy pine I had sitting around and decided to mess with one day. Sure glad this didn't become firewood.


And my winged aspen bowl. Turned completely on the lathe and the wings are left for artistic value on the piece.

Friday, September 21, 2007

2007 Woodturning Symposium Instant Gallery

Wanted to share some of the pictures from the 2007 Rocky Mountain Woodturner's Symposium. The following are the pictures from the Instant gallery. There was some amazing pieces this year from some very amazing wood turners.


This is a Funeral Urn from Lee Whiteside. It has an octagon middle to it like a bolt. A Very nice piece.

These are some natural edge platter's from Rex Burningham. Also the 3 Peppermills in the background are his as well. He did a demo on these and truly makes fantastic Natural Edge platters.

The next 2 are from Ron Gerton. He made an amazing bowl that was 2 1/2 feet approx across and made for a very striking piece. He came back and wrapped the edge with some sort of resin I believe. As you see in the 2nd picture, he lined the inside of it what I believe to be scroll sawed pieces, letters, and shapes.

This is some very interesting pieces from Trent Bosch. I really appreciate this work as I had the pleasure of attending one of Trent's classes earlier this year. He makes amazing looking knots that are joined with cast brass or metal knots to make the sculpture. You'll also notice the small bowl to the left. That was made by one of his daughters and shown in the gallery.


I very much liked this piece as I'm partial to the copper stands and their use with wood turnings. This was made by Steve Harding and is a great Sphere shape. The one in the background is a Much larger sphere and very impressive as well.

Allen Jensen turned these three pieces, all hollow forms.


I had the pleasure of seeing up close these pieces from H.P. Thode. They may look out of place at a wood turning symposium, however when you find out that these pieces are all to scale versions of these masterpieces which require you to turn all the spindles to accuracy. They suddenly appeal to all wood turners.


Ken Eberle turned these fine pieces of segmented turnings. I had the pleasure of talking with him Sunday morning prior to the symposium opening. He has taken an amazing leaps in his turnings from his first turning lesson's at a RV Park (I believe I recall) to his amazing pieces below. He documents the number of pieces as well as the amount of hours associated with each piece. He is correct when he told me that doing segmented turnings like this definitely takes Patience


Another Piece from Rex Burningham, a fantastic natural edge piece that looks like a comet.

A Pierced turning by Phil Lackey. All the holes are randomly different, as well as becoming less frequent towards the back.


A great piece by Ron Gerton, a Hanging hollow form. Great mixture of what I believe to be metal and wood.
One of David Nittman's amazing basket weave looking pieces. If you have not seen one up close you are missing out. You literally need to be within a foot or less before the basket weave illusion begins reveal itself as something else. He is a master at these pieces. This one is also decorated similarly on the bottom of the piece.

Donald Derry had a very interesting looking Rice Bowl here. Turned, Carved, decorated and formed to make a artistic piece.
Gene Westworth had this square turned lidded bowl for lack of a better description. Some very beautiful wood and detailed details :-) in this piece.

Doug Schnieder turned these hollow forms with voids. His placement of these voids as he shapes the form really add an amazing effect to them.
A few of Gordon Dekrey's Segmented turnings
The Amazing Cindy Drozda's Turnings and the great finiale's on them.

Bud Smith's Hollow forms with "Necklaces". Very neat accents to the piece. I believe I heard he makes these accents himself to work with the form better.
3 of Dave Kaufman's Hollow form's and platters. As you can see it doesn't appear he uses a solid piece of wood for his work. Always has to have some void, which he works very well into his pieces.
Curt Will had this piece on display. It struck me as interesting. Often you hear of natural edge bowls but not often do you see a natural edge hollow form or one that incorporates the bark edge of the tree.
Another one of David Nittman's pieces. This is a Large Striking platter that is approx 2' or more across.
And finally we have some segmented pieces from Curt Thebold. Although it's hard to see the segments with the wood grain and bleaching, but all three are segmented but are blended very well.